Drawmer DL221 Specifications download pdf (Page 10)

DL221 OPERATORS MANUAL

TECHNICAL SPECIFICATIONS

(Measurements taken at +4dBu operating level where applicable)

INPUT IMPEDANCE 10KOhm

HEADROOM +18dB

BANDWIDTH 20Hz - 30KHz (1dB)

NOISE @ UNITY GAIN (Referred to +4dBm)

Wideband !85dB

22Hz-22KHz !90dB

CCIR ARM !91dB

IEC A !93dB

DISTORTION

100Hz 1KHz 10KHz

Unity gain +4dBm Input 0.02% 0.02% 0.02%

+14dBm input 20dB GR. 0.05% 0.04% 0.04%

COMPRESSOR

Threshold -24dB to infinity (ref +4dBm)

Ratio Variable 1:1 to 20:1

Attack 50µS to 5mS

Release 50mS to 5 Sec

Output Gain -20dB to +20dB

PEAK LIMITER

Threshold +6dB (ref +4dB)

Ratio 50:1

Attack 50µS

Release Automatic

STEREO TRACKING ± 0.5dB from 0-22dB Gain Reduction.

POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 9 Watts

FUSE RATING 50mA for 230Volt, 100mA for 115Volt

Conforming to IEC127-2

FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working

CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)

WEIGHT (incl packaging) 3 Kgs

1 2 3 4 5 6 7 8 9 10

No comments

Drawmer DL221 Specifications Page 10