Drawmer SDX100 Specifications

6DRAWMERExpanderExpanders are generally used to remove unwanted noise during what should be passages of silence, byattenuating the signal below the th

operator’s manual7Noise GateNoise Gate:Threshold 0.0 to -50.0dBSets the level below which gating starts to takeplace. The meter to the right clearly s

8DRAWMERCompressorThreshold 0.0 to -50.0dB.Controls the level below which compressionstarts to take place.Ratio 1:1 to 20:1Ratio determines the amount

operator’s manual9LimiterRelease Button Fast, Mid 1, Mid2, Mid 3, SlowSets the length of time for the signal to return tonormal after the limiter has

10DRAWMERPatchesThe parameters of the SDX100 plug-in can bestored and retrieved by accessing the Load/Savemixer element buttons.Note: With all dynamic

operator’s manual11TroubleshootingGeneralTroubleshootingBecause all pc’s are different, with differing hardware and software, sometimes you may have t

ii

iiioperator’s manualCOPYRIGHTThis manual is copyrighted © 2002 by Drawmer Electronics, Ltd.With all rights reserved. Under copyright laws, this manual

iv

operator’s manual1License agreementSetupSystem RequirementsSDX100 InstallationEntering the PasswordAccessing the SDX100 from SoundscapeIntroductionAbo

2DRAWMERInstalling from the CDRomInsert the CDRom into your CDRom drive.From the Taskbar, click on Start and selectRun.. Select Browse and go to the D

operator’s manual3Before using the SDX100 plug-in apassword input is required. To enterany password within the Soundscapeoperating system go to the dr

4DRAWMERNoise Gate. Operates like an audio switch,and is particularly suited to percussive signals,where it can shape the envelope to create acrisp, w

operator’s manual5Using the SDX100Front Panel OverviewThe easiest way to navigate the SDX100 is to imagine it in five sectionsInputInput Meters 0 to -