Drawmer MX PRO MX60 Specifications

DRAWMERMX30DUAL GATED COMPRESSOROPERATORS MANUALCONTENTSSAFETY CONSIDERATIONS page 1INTRODUCTION page 2INSTALLATION page 3• Audio Connections page 3•

MX30 OPERATORS’ MANUAL8PEAK LIMITERLevel: Sets an absolute limit to the level that the output signal will not bepermitted to exceed. This limiter is v

MX30 OPERATORS’ MANUAL 9OPERATIONThe unit should be connected in line with the signal to be processed via suitable insertpoints. Ensure that the inser

MX30 OPERATORS’ MANUAL10Because the Gate is self-adapting to the programme dynamics, it should be possible toobtain far more satisfactory results than

MX30 OPERATORS’ MANUAL 11TECHNICAL SPECIFICATIONS(Measurements taken using +4dBu balanced XLR input where applicable)INPUT IMPEDANCE 20KOhm (bal), 4KO

MX30 OPERATORS’ MANUAL12BLOCK DIAGRAM

MX30 OPERATORS’ MANUAL 13

COPYRIGHTThis manual is copyrighted © 2011 by Drawmer Electronics, Ltd. With all rightsreserved. Under copyright laws, this manual may not be duplicat

MX30 OPERATORS’ MANUAL 1DRAWMER MX30Dual Gated Compressor SAFETY CONSIDERATIONSCAUTION - MAINS FUSETO REDUCE THE RISK OF FIRE REPLACE THE MAINS FUSE O

MX30 OPERATORS’ MANUAL2INTRODUCTIONThe MX30 is a dual channel gate and compressor-limiter designed to fulfil the needs ofprofessional studio and live

MX30 OPERATORS’ MANUAL 3INSTALLATIONThe MX30 is designed for standard 19" rack mounting and occupies 1U of rack space.Avoid mounting the unit dir

MX30 OPERATORS’ MANUAL4AUDIO CONNECTION DIAGRAM

MX30 OPERATORS’ MANUAL 5Accessing the internal power switch and fusePOWER CONNECTIONIf, for some reason, the unit is to be operated at a mains input v

MX30 OPERATORS’ MANUAL6CONTROL DESCRIPTIONBoth channels of the MX30 are identical and may be used completely independently orlinked for stereo operati

MX30 OPERATORS’ MANUAL 7COMPRESSORThreshold: This control determines the input level above which gain reductionwill be applied and may be set in the